| Naam | Vissersdvc6200 Instelmechanisme voor ET Controleklep met 667 pneumatische actuator 67CFR filterregel |
|---|---|
| Het Model van het klepinstelmechanisme | DVC6200 |
| Het merk van het klepinstelmechanisme | Vissers |
| Outputdruk | 1/4 intern NPT |
| Instrumentenmacht | 11 tot 30 VDC bij 10 mA |
| Kenmerken | Eenvoudige inbedrijfstelling met snelle, eenvoudige configuratie |
|---|---|
| Communicatieprotocol | HART |
| Resistentie | 4-20mA, 450 Ohm Invoerweerstand |
| Invoersignaal | Elektrisch |
| Standaardspanning | 10 VDC |
| Hysteresis | 0,2% |
|---|---|
| Omgevingstemperatuur | -20°C tot +60°C |
| Voorwaarde | nieuw en van oorsprong |
| Nominale diameter | 2.5" ((63mm), 4" ((100mm), 6" ((150mm) |
| Precisiteit | ±1%, ±1,6% |
| luchtvochtigheid | 0-100% Niet-condenserend |
|---|---|
| Kenmerken | Eenvoudige inbedrijfstelling met snelle, eenvoudige configuratie |
| Invoersignaal | Elektrisch |
| Minimale vereiste werkstroom | -20 °C tot +80 °C (-4 °F tot +178 °F) |
| Type | Digitale positioner |
| Brandnaam | visser |
|---|---|
| Model | DVC6200 |
| Gegevensinterface | Draadloos |
| Diagnostiek | - Jawel. |
| Inputsignaal | Elektrisch |
| Invoersignaal | Elektrisch |
|---|---|
| Communicatieprotocol | 4-20 DOCTORANDUS IN DE LETTERENhert |
| Werktemperatuur | Standaardtemperatuur, Op hoge temperatuur |
| Positiecontrole | Throttling On/Off Controle, |
| Max Outlet Pressure | 145 psig |
| Invoersignaal | Elektrisch |
|---|---|
| Communicatieprotocol | 4-20 DOCTORANDUS IN DE LETTERENhert |
| Werktemperatuur | Standaardtemperatuur, Op hoge temperatuur |
| Positiecontrole | Throttling On/Off Controle, |
| Max Outlet Pressure | 145 psig |
| Garantieperiode | 1 jaar |
|---|---|
| Stromingskenmerken | Gelijk percentage |
| Outputkenmerken | Lineariteit |
| Drukklasse | Voor de toepassing van deze richtlijn wordt het gebruik van de in bijlage I vermelde chemische stoff |
| Certificeringen | PED, CUTR, ATEX, CRN |
| Model | Spirax Sarco HV3 Bronze Bodied Globe Stop Kleppen voor stoomwaterolieluchttoepassingen met handwiel |
|---|---|
| Type verbinding | 2 draad |
| Uitgangssignaal | 4 ~ 20 mA gelijkstroom |
| Merk | spirax sarco |
| Bus/sensor | 4-20 mA Zender |
| Type | GX |
|---|---|
| Verklaard | CRN, CUTR, diffuse emissies, PED, SIL-naleving |
| Klepgrootte | NPS 1/2, NPS 3/4, NPS 1, NPS 1-1 / 2, NPS 2, NPS 3, NPS 4, NPS 6 |
| Stroomkenmerk | Saldopercentage, lineariteit, karakterisering |
| Materiaal | Koolstofstaal, tweezijdig roestvrij staal, legering |